0
(0)

Daikin FIT Aurora Heat Pump

The Daikin FIT Aurora Heat Pump (DH9VS series) brings cutting-edge inverter technology, efficient heating & cooling, and advanced diagnostics to your home comfort system. With high performance, whisper-quiet operation, and smart controls, it’s a versatile solution for year-round climate control. At TopCare HVAC of Oakville, we provide full services—from system design and professional installation to maintenance, repair, and warranty support—to maximize the benefits of your Aurora heat pump.

Technical Specifications

Here’s a snapshot from the spec sheet (SS-DH9VS-R32): 

SpecificationValue / Range
Efficiency (SEER2)Up to 21 SEER2 
Heating Performance (HSPF2)Up to 10 HSPF2 
Capacity2 to 3 Tons (models) 
CompressorVariable-speed swing inverter 
RefrigerantR-32 
Sound / Quiet ModeAs low as 47 dB(A) in quiet mode 
Cabinet / ConstructionHeavy-gauge galvanized steel; powder-coated; 500-hour salt spray tested 
Warranty12-Year Parts & 12-Year Unit Replacement (with registration) 
Installation TypeDucted system (compatible with central ductwork) 
Smart Control CompatibilityCompatible with Daikin One+ and communicating equipment 

 

Daikin FIT Aurora Heat Pump - TopCare HVAC of Oakville Ontario 3

Key Features & Benefits

Below are the standout features that help the FIT Aurora differentiate itself:

  • High Efficiency & Inverter Technology
    The Aurora uses a variable-speed swing compressor and inverter control to match output with demand, reducing energy waste and improving comfort. 

  • Strong Heating & Cooling Capability
    It offers up to 21 SEER2 (cooling efficiency) and up to 10 HSPF2 (heating). 

  • R-32 Refrigerant
    Uses R-32 refrigerant for better environmental performance and heat transfer. 

  • Quiet Operation
    Includes “Quiet-mode” with multiple sound levels; unit can run as low as 47 dB(A) in quiet mode. 

  • Smart & Diagnostic Features
    Communicating mode (only two low-voltage wires to the outdoor unit), diagnostic LED indicators, fault code memory, and “Daikin Inside” diagnostic logic. 

  • Boost Mode / Field-Selectable Features
    During unusually heavy loads, a boost mode increases compressor speed to maintain comfort. 

  • Durable Cabinet & Maintenance-Friendly Design
    Heavy-gauge galvanized steel construction, powder-coat finish, 500-hour salt-spray tested. Access from top & side for servicing. 

  • Cold Climate / Defrost Features
    Intelligent defrost mode and hot gas base pan to reduce frosting issues in cooler climates. 

Installation, Maintenance & Repair Services (Oakville)

Professional Installation

Proper installation is vital for performance, longevity, and warranty. Our process includes:

  • Heat-load and cooling-load analysis

  • Matching to indoor units and ductwork

  • Precise refrigerant charging & airflow balancing

  • Electrical & safety inspections

  • Initial start-up, testing, and verification

Routine Maintenance & Tune-Ups

Annual maintenance should include:

  • Cleaning coils (evaporator & condenser)

  • Checking electrical connections, tightening where needed

  • Verifying refrigerant pressures

  • Inspecting controls and thermostats

  • Testing diagnostics & safety features

Diagnostic & Repair Services

We can troubleshoot and repair faults such as refrigerant leaks, control issues, compressor anomalies, or sensor failures, using OEM components and manufacturer protocols.

Upgrades & Integration

If you’re retrofitting or upgrading, we help integrate smart controls, indoor air quality upgrades, or compatible indoor units (coils, air handlers) to maximize system synergy.


Frequently Asked Questions (FAQs)

Q: Is the Aurora heat pump suitable for all climates?
Yes — it supports cold climate operation with features like intelligent defrost and hot gas base pan, which help maintain heating in lower ambient conditions. 

Q: How quiet is it?
In Quiet Mode, it can run as low as 47 dB(A), offering very unobtrusive operation. 

Q: What is SEER2 and HSPF2?
These are the updated efficiency ratings: SEER2 for cooling, HSPF2 for heating. Higher values mean better energy performance. The FIT Aurora reaches up to 21 SEER2 and 10 HSPF2. 

Q: What refrigerant is used, and is it environmentally friendly?
It uses R-32 refrigerant, which has lower global warming potential compared to older refrigerants. 

Q: What are the installation requirements?
Must be installed by a certified technician, registered within allowed timeframe, and maintained annually to keep warranty validity.

Q: What indoor systems are compatible?
It is compatible with standard ducted systems and communicating indoor units (coils / air handlers) and integrates with Daikin’s smart thermostat systems. 


Why Choose TopCare HVAC of Oakville for Your FIT Aurora

  • Certified and experienced in Daikin whole-home systems

  • Local to Oakville, Burlington, Milton, Mississauga — fast service response

  • Transparent pricing with no hidden costs

  • Financing options available for major installations

  • Ongoing maintenance contracts and reliable after-sales service


Call to Action

Ready to upgrade to the Daikin FIT Aurora Heat Pump? Contact TopCare HVAC of Oakville today for a free quote, home assessment, or to schedule your installation or service. Let us design and support the system that best fits your home and comfort needs.

DAIKIN FIT Aurora Heat Pump - DH9VS
DAIKIN FIT Aurora Heat Pump - DH9VS
DAIKIN FIT Heat Pump - DH7VS
DAIKIN FIT Heat Pump - DH7VS
DAIKIN FIT Heat Pump - DH6VS
DAIKIN FIT Heat Pump - DH6VS
DAIKIN FIT Heat Pump - DZ6VS
DAIKIN FIT Heat Pump - DZ6VS
DAIKIN VRV LIFE
DAIKIN VRV LIFE
SkyAir FTQ Ducted
SkyAir FTQ Ducted
DZ9VC
DZ9VC
DH7TC
DH7TC
DZ7TC
DZ7TC
DH5SE
DH5SE
DZ5SE
DZ5SE
DH4SE
DH4SE
DH4SQ
DH4SQ
DZ4SE
DZ4SE
DZ4SQ
DZ4SQ

Please rate our website

Let us improve this!

Tell us how we can improve?